Professional HVAC Services in Davenport, FL

Performed a diagnostic on a 3-ton Goodman air handler manufactured in 2021 with a 2022 condenser. System is not registered. Upon inspection, I found the system running low on refrigerant, with high superheat and low subcooling. I checked compressor amperage, fan motor amperage, system pressures, subcooling, superheat, and temperature split. The capacitor was tested and found to be within tolerance. The contactor is pitted and recommended for replacement. I also inspected the drain pan and drain line and found them dirty with algae and bacterial buildup. The evaporator coil was found to be freezing due to the system being low on refrigerant. I performed a complimentary leak search and found multiple refrigerant leaks in the evaporator coil. I contacted the office to verify the system warranty and was advised that the warranty expired in August 2026, approximately one month ago. I prepared a proposal including evaporator coil replacement, five pounds of refrigerant, drain line clean

Performed PCB board replacement. After completing the replacement, I tested the system operation and ran the unit through a complete test cycle. The system is now operating normally in cooling mode. Customer stated that the previous technician did not complete the drain cleaning. I vacuumed the drain line, flushed it with two gallons of water, and primed the drain line. I also added Viper drain treatment.

Performed a diagnostic on a 3-ton Goodman straight-cool system. The system was freezing up, so I performed a complete system inspection and leak search. No active refrigerant leak was found using electronic leak detection and UV light. UV dye was previously present in the system, but no visible dye leak was found. The system is low on refrigerant, and based on the inspection, a possible leak is suspected at the suction-line service valve. During the inspection, I also found the return duct damaged and open to the exterior of the trailer. The evaporator coil, condenser coil, and blower wheel are heavily impacted with debris and require cleaning. The contactor was found to be severely pitted and not operating properly. I recommended replacement, and the customer approved the repair. I replaced the contactor and tested the system afterward. The system is operating, but it remains low on refrigerant and is currently operating outside of manufacturer specifications. I presented the custo

Customer renewed for the CubClub Membership and added the mini split. First maintenance is in January and the second in June.

Performed a deep cleaning on the mini-split system. Removed all covers and thoroughly cleaned the evaporator coil, blower wheel, and covers. Reassembled the system and tested operation. The unit is cooling and draining properly at this time.

Performed a diagnostic on the downstairs HVAC system and found the system low on refrigerant. The water dripping from the system is most likely related to the evaporator coil freezing due to the low refrigerant condition. Performed a full system inspection and found the blower wheel heavily impacted with debris, and the evaporator coil has a refrigerant leak. Performed a complementary electronic leak search and confirmed the leak at the evaporator coil. Additional issues found include the blower capacitor and condenser capacitor both being out of tolerance. The condenser contactor is badly pitted, and the condenser coil is heavily impacted with debris. Presented the customer with a repair quote. The customer requested a proposal for system replacement, so I contacted the office and created a lead for Kenneth. I explained to the customer that replacing both systems may qualify for a better overall price and additional discounts. Kenneth arrived on-site and presented the replacement p